Procurement Profile: What the Buyer Is Actually Sourcing

A receiver with several listening roles

The supplied specification lists AM 530-1700 KHz, FM 88-108 MHz, WX 162.55-164.4 MHz, VHF 145-175 MHz, TV1/TV2 audio and SW1-SW4 5.8-17.5 MHz. This gives the model a different sourcing profile from compact single-band or basic dual-band radios.

Shared and private listening in the same housing

A 2.25-inch 8Ω 0.5W built-in speaker supports normal room or group listening, while the 3.5mm earphone jack and supplied headphones allow personal listening in travel, shared accommodation or nighttime settings.

Several ways to keep the unit operating

Power can come from the included 3.6V 300mAh AAA Ni-CD pack, three AA dry batteries, the 9V/400mA hand-crank generator, the 5V/25mA solar panel or a DC 4.5-6V input. The value for a preparedness buyer is the redundancy between stored batteries, replaceable cells, manual generation and external input.

Technical Reference

Item	Supplied specification	Item	Supplied specification
Band count	10 bands	AM	530-1700 KHz
FM	88-108 MHz	WX	162.55-164.4 MHz
VHF	145-175 MHz	TV audio	TV1: CH 2-6 / TV2: CH 7-13
Shortwave	SW1-SW4: 5.8-17.5 MHz	Hand crank	9V 400mA
Solar panel	5V 25mA; source lists size 97 × 26 cm	Rechargeable pack	3.6V 300mAh AAA Ni-CD; included
Dry battery	3 × AA; not included	DC input	DC 4.5-6V
Speaker	2.25 in, 8Ω 0.5W	Earphone	3.5mm jack; headphones supplied
Indicators	LO / HI / TUN	Dimensions	16.2 × 6.2 × 13.5 cm

Where a Handheld Radio with Headphone Fits in a Buyer Range

The HT-777 is easiest to position when the buyer wants a traditional analog radio with more band choices and two listening modes. It does not need to compete directly with small pocket radios, digital clock radios or lantern-style emergency products because its commercial value comes from tuning breadth and power redundancy.

01/

Multi-band radio retail

For radio specialists and general electronics retailers, the ten-band layout creates a clear product story: AM/FM for everyday broadcasts, shortwave for wider listening, and additional WX/VHF/TV-audio ranges listed in the supplied specification. The front indicators and mechanical tuning controls keep the user experience visibly analog.

02/

Preparedness and backup assortments

For emergency-product distributors, the product can be evaluated around power continuity rather than around a flashlight or power-bank feature. Rechargeable, dry-cell, solar, crank and DC-input routes allow the receiver to remain usable under different storage and power conditions.

03/

Travel, camping and shared accommodation

The top handle makes the radio easy to move, while the built-in speaker and included headphones let users switch between shared and private listening. This combination is useful in campsites, dormitory-style spaces, temporary accommodation and travel settings.

04/

Project and private-label programs

A buyer can build the commercial version around destination-market bands, casing color, branding, manual language, packaging and accessory presentation. Any frequency or power change should be confirmed against the actual HT-777 platform before artwork is finalized.

Band-and-Channel Review Before Quotation

Buyer decision	Questions to settle before sample approval
Band claims	Which of the listed AM/FM/WX/VHF/TV/SW ranges will be printed on the package for the target market?
Listening method	Will both speaker use and the supplied-headphone use case be shown in retail artwork?
Power story	Which battery and charging routes are essential to the sales channel?
User interface	Are LO / HI / TUN indicators and analog tuning explained clearly in the manual?
Accessories	Are headphones, any adapter requirement and dry-battery exclusions stated correctly?

Commercial Configuration Workbook

For HT-777, the order can be controlled through three working sheets instead of a generic six-step OEM diagram. The purpose is to separate radio engineering decisions from branding and packing decisions so that a late artwork change does not accidentally alter the approved technical version.

Sheet A - Spectrum and power

• Destination market and the frequency ranges that must remain in the final SKU.

• Rechargeable-pack arrangement, dry-cell support, DC input, solar input and crank function.

• Any market-specific labeling required for the radio bands or power inputs.

Sheet B - Brand and user presentation

• Logo placement, casing color, product label and model identification.

• Manual language, band naming, operating instructions and accessory list.

• Retail-box hierarchy: tuning breadth, headphone use, power redundancy or preparedness positioning.

Sheet C - Physical approval reference

• Approved sample with the final reception, controls, speaker and headphone operation.

• Final battery / power configuration and supplied accessories.

• Approved box, manual, barcode / SKU label and outer-carton identification.

Change-Risk Map

Requested change	Review route	Why it cannot be treated as a simple cosmetic edit
Logo / labels	Commercial review	Low engineering impact, but the model and band information must match the approved SKU.
Housing color	Material / MOQ review	Color affects production planning even when electronics stay unchanged.
Frequency setup	Engineering review	A market-specific band request can affect tuning and compliance claims.
Rechargeable pack	Electrical + shipment review	Battery chemistry and specification affect operation and shipping documents.
Headphone / accessory set	Sample + packing review	Accessory type must match the jack and the final retail pack.
Retail box / manual	Commercial + technical review	Printed claims must not describe a band or power function that is absent from the approved sample.

Commercial Timing References from the Supplied Page

The supplied page states a standard MOQ of 500 PCS, sample preparation of about 5 days for a standard evaluation, and a typical mass-production cycle of around 30 days. Final timing depends on customization, materials, quantity and the factory schedule at order confirmation.

HT-777 Sample and Batch Acceptance Protocol

A Handheld Radio with Headphone should be approved by listening path, reception group and power route rather than by appearance alone. That approach gives the buyer a clearer release standard for a product whose purchasing value comes from multiple radio bands and multiple operating methods.

Acceptance block	What to verify	Commercial risk controlled
AM / FM	Tuning across the listed ranges, control response and speaker audio	Confirms the everyday broadcast function.
WX / VHF / TV audio	Operation against the approved sample and destination-market specification	Prevents packaging from overstating non-approved band behavior.
Shortwave	SW1-SW4 tuning and antenna operation	Confirms the wider-listening feature that differentiates the SKU.
Private listening	3.5mm earphone jack and supplied headphones	Confirms the key second listening mode.
Power routes	Ni-CD pack, 3×AA support, crank, solar and DC 4.5-6V input	Confirms that the promised backup routes are functional.
User feedback	LO / HI / TUN indicators, tuning controls, handle and antenna	Confirms the analog interface matches the approved sample.
Retail identity	Model label, manual, barcode, box and carton marks	Links the approved technical version to the correct buyer SKU.

Direct Historical Record: HT-777 in a Government Procurement Program

The supplied product page states that HT-777 itself was supplied together with HT-999 and HT-555 for an Afghanistan government emergency-preparedness project from 2011 to 2013. The program ran across several models and repeated production cycles, with cumulative deliveries above 800,000 radios.

For a buyer evaluating HT-777 today, the relevance is not that a current order automatically has the same specification as the historical program. The relevant evidence is that this model family participated in a long-running procurement program that required repeated production, material planning and batch coordination over three years.

Shipment Release Dossier

For a multi-band receiver, shipment preparation should connect the physical product, accessory pack and printed band claims to one approved SKU. A finished unit should not be released only because the radio powers on; the buyer needs the carton and documentation to identify the same version that was sampled.

Release file 1 - Product and accessory match

• Approved radio version, rechargeable pack and dry-battery arrangement.

• Supplied headphones and any other confirmed accessories.

• Correct model label and destination-market identification.

Release file 2 - Printed presentation

• Retail box and manual show only the approved bands and power routes.

• Barcode / SKU labels and carton marks match the purchase order.

• Adapter or battery exclusions are stated according to the confirmed pack.

Release file 3 - Transport-document check

The source page lists UN38.3, MSDS and air / sea transport documentation as possible support documents when the confirmed battery configuration requires them. Because the standard specification shown here uses a 3.6V 300mAh Ni-CD rechargeable pack, the applicable document set should be determined from the actual battery and shipping method rather than copied automatically from a lithium-battery model.

Supplier Evidence and Buyer FAQ

product-1536-1024

The supplied page includes customer/factory imagery and a certificate display. It describes Hai Tong's production support as including SMT, assembly, aging-testing and shielding-testing resources, and references ISO9001, CE, RoHS, FCC, design-patent and BSCI-related credentials where applicable. Exact documents should be confirmed for the ordered model, configuration and destination market.

Buyer FAQ

Q1: What Is The Main Difference Between HT-777 And A Basic AM/FM Portable Radio?

HT-777 adds the wider group of listed WX, VHF, TV-audio and shortwave ranges, multiple power routes, a supplied headphone option and a larger handled format. The buyer should decide which of those differences matter to the target channel before finalizing the retail message.

Q2: What Should I Confirm Before Approving The Sample?

Confirm the required bands, tuning behavior, speaker audio, headphone output, rechargeable and dry-battery operation, crank and solar input, DC input, indicators, antenna, handle, labeling and proposed packaging.

Q3: What Is The Standard MOQ?

The supplied page lists 500 PCS. Any request for special color, frequency setup, battery arrangement, packaging or accessories should be reviewed with the order quantity before quotation.

Q4: How Should The Historical 800,000+ Unit Program Be Used In A Product Page?

It can be presented as a historical manufacturing and procurement record involving HT-777, HT-999 and HT-555. It should not be used to claim that every current HT-777 order has the same configuration, test standard or end customer.

Q5: Can I Order A Handheld Radio With Headphone Sample Before Mass Production?

Yes. The supplied page states that a sample can generally be prepared before bulk production. The buyer should use that sample to freeze the technical version, accessory set, branding and packaging before the production order is released.

Hot Tags: handheld radio with headphone, China handheld radio with headphone manufacturers, suppliers, factory