Why the HT-004 Is Not Just Another Clock Radio

Two wake schedules are the defining feature

Separate AL1 and AL2 controls let one unit serve two people, two work shifts or different weekday and weekend routines. That gives buyers a clear merchandising point that is more specific than simply listing an alarm function.

Radio is integrated into the morning routine

AM 540-1600 kHz and FM 88-108 MHz provide everyday broadcast listening. Automatic radio activation can be used as the wake source, while the 56.5 mm, 8Ω / 0.5W speaker handles both radio playback and radio-alarm audio.

The interface is built for direct bedside control

Memory, Minute Up, Hour Down, AL1, AL2, Vol+, Vol-, Band, Sleep and Dimmer controls are grouped for direct access. The illuminated display and frequency indication support use in low-light rooms without requiring a menu-driven interface.

Clock continuity is separated from normal radio use

The main product is specified for 220V AC wall power. A rechargeable 9V DC battery pack is listed for keeping the clock operating when the radio is switched off, so the buyer should treat mains operation and timekeeping backup as two different parts of the power specification.

Technical Sourcing Reference

Item	Confirmed specification	Item	Confirmed specification
Wall power	220V AC	Radio bands	AM / FM
AM range	540-1600 kHz	FM range	88-108 MHz
Speaker	56.5 mm, 8Ω, 0.5W	Backup pack	9V DC rechargeable battery pack
Alarm system	AL1 / AL2 + automatic radio activation	Display area	89.5 x 25 mm illuminated LED area
Controls	Memory / Minute Up / Hour Down / AL1 / AL2 / Vol+ / Vol- / Band / Sleep / Dimmer	Antenna	Soft antenna
Rear connection	5V DC input shown	Phone charging	USB connection shown

Where a Dual Alarm Digital Radio Clock Fits in a Buyer Range

The strongest positioning is not "more functions," but "two independent schedules with familiar bedside controls." That message works across household and hospitality channels, while the surrounding feature emphasis can change by buyer type.

01/

Shared bedroom and couple-oriented retail

AL1 and AL2 give two users their own wake times. Sleep and dimmer controls support nighttime use, while AM/FM listening and radio wake-up provide a traditional alternative to phone alarms.

02/

Shift-work and changing-schedule use

For users whose wake time changes during the week, two stored alarm settings can reduce repeated reprogramming. Retail artwork can explain this as schedule flexibility rather than presenting the model as a complicated digital device.

03/

Hotel and serviced-accommodation supply

Hospitality buyers can focus on clear time visibility, intuitive top controls, radio listening and a simple two-alarm layout. Room programs may also require project-specific logo treatment, manuals, labels or packaging rather than consumer-retail artwork.

04/

Traditional home-electronics assortments

For general retail, the unit can sit between a basic single-alarm clock radio and more complex connected bedside products. Its value comes from dedicated physical controls, two alarms, AM/FM and a recognizable bedside format.

Room-Use Message Matrix

Buyer / channel	Lead message	Functions to emphasize	Commercial check
Couples / shared rooms	Two independent wake settings	AL1, AL2, dimmer, radio wake-up	Make AL1/AL2 operation obvious in artwork and manual.
Shift workers	Less repeated reprogramming	Two alarms, memory, hour/minute controls	Confirm exactly how settings are stored on the approved unit.
Hotels / serviced apartments	Simple room amenity	Visible clock, AM/FM, alarm, dimmer, volume	Confirm voltage, labeling and room-use instructions for the destination.
General retail	Familiar clock-radio format with a useful upgrade	AM/FM, dual alarm, sleep, USB connection	Do not let USB or 5V rear input overshadow the core clock-radio proposition.

Create the Order as a Room-Ready Configuration File

For HT-004 projects, a room-ready configuration file is more useful than repeating a generic OEM workflow. It keeps the buyer's operating requirements, mains specification, visual identity and packing instructions together in one release record.

Section A - Operating behavior

• AL1 and AL2 operation and the expected radio wake-up behavior.

• Sleep and dimmer functions that will be described in the manual.

• AM/FM frequency configuration and control labeling.

• USB phone-charger connection and rear 5V input only if they are part of the confirmed order version.

Section B - Destination and electrical details

• Destination market and required mains / plug arrangement.

• Product rating label and any destination-specific electrical marking requirements.

• Backup-pack specification confirmed for the order.

Section C - Brand and room presentation

• Logo, product label and model identification.

• Display / control naming used in the manual and on retail or hospitality materials.

• Color box, hotel-project box, barcode, SKU label and outer-carton marks.

Section D - Approval evidence

• Evaluation sample approved for display, radio, AL1/AL2 and controls.

• Final artwork checked against the physical sample.

• Packing sample or packing specification released before mass production.

Change-Control Table

Requested change	Review owner	Why it needs control
Alarm / control behavior	Product + QA	A small logic change can affect the manual, user expectation and inspection checklist.
Mains / rear-power arrangement	Engineering + sourcing	Electrical configuration must match the destination and production BOM.
Logo / labels	Commercial approval	These are usually low-risk if they do not alter controls or compliance information.
Retail / hotel packaging	Commercial + packing	Box language, accessories and carton identification must match the released SKU.
USB charging claim	Product + QA	Any output claim should be checked on the exact approved version rather than copied from a draft image.

Commercial reference from the supplied page: standard MOQ is 500 PCS, a sample can normally be prepared in about 5 days, and mass-production planning is approximately 30 days subject to quantity, customization, material status and factory schedule.

Dual-Alarm Acceptance Should Follow a Night-to-Morning Sequence

A Dual Alarm Digital Radio Clock should be approved by running the unit through the routine it is meant to support, not by checking isolated buttons once. The sequence below is designed to catch interaction problems between clock settings, AL1/AL2, radio wake-up, display behavior and backup timekeeping.

Test point	Practical check	Buyer risk controlled
1. Power-up	Connect the approved mains / power configuration and confirm display startup	Establishes the correct electrical version before feature testing.
2. Set clock	Use Hour Down / Minute Up and confirm display response	Confirms the basic time-setting workflow and button labels.
3. Program AL1	Set the first alarm and verify stored time	Checks the first wake schedule independently.
4. Program AL2	Set a different second alarm and verify stored time	Confirms the two schedules do not overwrite one another.
5. Radio wake-up	Tune AM or FM and confirm automatic radio activation at the selected alarm	Links radio, alarm logic and speaker output in one functional test.
6. Night controls	Check Sleep, Dimmer, volume and band controls in normal use	Confirms the functions most likely to be used immediately before sleep.
7. Backup continuity	Verify clock retention behavior using the confirmed 9V backup arrangement	Checks the timekeeping continuity described for the product.
8. Connectivity	Check USB phone-charger connection / rear 5V input if included in the released SKU	Prevents image-based or draft claims from appearing on the final packaging without verification.

Pre-Production Reference Sample

• Keep one approved sample that clearly shows the accepted AL1/AL2 behavior.

• Record the destination power configuration and backup-pack version on the order specification.

• Use the actual product labels and manual wording during sample approval, not placeholder artwork.

• Build the final inspection sheet around the approved control sequence so repeat orders can be checked the same way.

Why This QC Structure Is Product-Specific

Emergency-radio durability tests such as crank-cycle testing are not relevant to this bedside model. The useful acceptance points are clock logic, dual alarms, AM/FM reception, speaker output, display / dimmer behavior, power continuity, controls, labeling and packing - the functions the buyer is actually purchasing.

Packing for a Bedside Product Is Also a Presentation Task

A clock radio is often handled as a finished room or retail item rather than as a rugged field product. Inner packing should therefore protect the display window, top controls, cabinet surfaces and any supplied accessories while keeping the retail or hospitality presentation clean when the carton is opened.

Packing release checklist

• Display surface protected from rubbing or pressure marks.

• Top-panel buttons protected from continuous compression during transport.

• Product label, manual, barcode / SKU and carton marks match the approved order.

• Power / plug version and any included accessories match the destination configuration.

• Buyer-specific room number, project identification or shipping marks added only when included in the order.

Repeat-Order Control Matters More Than Reusing a Template

The supplied material describes Hai Tong's experience with long-running overseas radio programs and repeated production batches. For a clock-radio buyer, the relevant capability is maintaining the same approved alarm behavior, labels, packaging version and power configuration when an initial order becomes a recurring program.

Production records and approved artwork can be used as the reference for later purchasing, while requested revisions should be treated as controlled changes rather than silently mixed into repeat batches.

Buyer-Visit Review Points for HT-004

During sample / factory review	Useful evidence
Product operation	Live demonstration of clock setting, AL1/AL2, radio wake-up, dimmer and sleep.
Production control	How approved labels, controls and functional checks are referenced during assembly / inspection.
Packing	Actual inner protection, retail or project box, barcode and carton identification.
Repeat orders	How the approved version is documented so later batches can follow the same configuration.

Supplier Evidence for Clock-Radio Buyers

product-1536-1024

The supplied page identifies Hai Tong as a radio manufacturer with in-house SMT capability, assembly lines, testing lines, aging facilities and EMI/RF shielding test rooms. It also shows customer / factory imagery and certification materials. For an HT-004 program, buyers should request only the reports, certificates or factory records relevant to the exact product and destination rather than assuming every document shown applies to every clock radio.

Buyer FAQ

Q1: What Is The Main Difference Between HT-004 And A Basic Single-Alarm Clock Radio?

HT-004 provides separate AL1 and AL2 settings, along with AM/FM, automatic radio wake-up, sleep and dimmer controls. The two-schedule function is the clearest product-positioning difference.

Q2: Is The Unit Battery Powered?

The supplied specification lists 220V AC wall power as the main source. A 9V DC rechargeable battery pack is listed for keeping the clock operating when the radio is switched off, so the backup pack should not be presented as the main operating power source.

Q3: What Should A Private-Label Buyer Confirm Before Artwork Starts?

Confirm destination power requirements, AM/FM configuration, AL1/AL2 behavior, USB / rear 5V connections if included, logo, labels, manual language, retail or project packaging, barcode and carton marks. Artwork should describe the approved sample rather than a generic catalog version.

Q4: What Is The Standard MOQ?

The supplied page lists 500 PCS as the standard MOQ. Final commercial conditions can still depend on color, branding, packaging and any requested product changes, so the order specification should be confirmed before production.

Q5: Can I Evaluate A Dual Alarm Digital Radio Clock Before Mass Production?

Yes. A sample can be used to verify the display, AM/FM reception, AL1/AL2 settings, automatic radio activation, speaker output, sleep / dimmer controls, power behavior, labeling and packaging before the production version is frozen.

Hot Tags: dual alarm digital radio clock, China dual alarm digital radio clock manufacturers, suppliers, factory